Prices subject to change without notice.  Call for current prices.
Copyright 2007 - 2014 Western States Chemical
Lubricants, Penetrants & Sealants
Western States Chemical offers a wide
variety of lubricants, penetrants and
sealants suitable for use in a wide variety
of environments. Some of our more
popular ones are listed below.
Western States Chemical
MICRO MIST
SILICONE LUBRICANT  

BEST SELLER!
High-silicone protectant & lubricant spray
Contains no CFCs or chlorinated solvents.
Dries fast with no greasy or oily film. Provides
a water- and weather-resistant barrier that
protects surfaces from corrosion and wear.
Virtually odorless and colorless when dry.



AT-593       12 X 11 oz. Net Wt. / Case
Call for Quote

(Click for More Information)
 
Western States Chemical
PENELUBE 5
 
PENETRATING LUBRICANT

Penetrant, Lubricant, Demoisturant,
Protectant
Non-flammable, all purpose, non-conductive
mechanic’s spray. Penetrates through rust
and corrosion to loosen frozen nuts and
bolts. Displaces moisture in wet electrical
systems. Leaves treated surfaces protected
with residual anti-corrosive film. Does not
contain any chlorinated solvents.

AT-209       12 X 14 oz. Net Wt. / Case
Call for Quote

(Click for More Information)
         
Western States Chemical
ELECTRO-KLEEN
SAFETY SOLVENT

A residue-free, super fast drying, high power
spray that dissolves grease and rinses away
dirt and grime without injury to working parts.  
Safe on energized electrical equipment,
unique valve system provides both pencil
stream and fan-type sprays. Non-flammable,
non-conductive, non-corrosive, non-ozone
depleting & free of petroleum distillates.

AT-550          12 X 18 oz. Net Wt. / Case   
Call for Quote

(Click for more information)
 
Western States Chemical
FOOD GRADE SILICONE SPRAY


Silicone-based food grade lubricant Use as
a lubricant, release agent, water repellent,
protective coating and polish.  Safe for
incidental food contact on machinery. Heat
stable from -40°F to +392°F. Contains no
chlorinated solvents.



AT-590          12 X 11 oz. Net Wt. / Case   
Call for Quote

(Click for more information)
         
PENETRATING LUBRICANT
WITH PTFE


Rapid penetratant with superior lubricant
polytetrafluoroethylene
Forceful spray that provides rapid penetration
through rust and corrosion to loosen frozen
nuts, bolts, and mechanical parts. Provides
effective lubrication over a broad
temperature and pressure range. Safe on
aluminum, plastic, and paint. Includes
extension tubes for easier application to
remote areas.

AT-501                 12 X 11 oz. Net Wt. / Case   
Call for Quote
 
Western States Chemical
SANI-LUBE
FOOD EQUIPMENT LUBRICANT

Super pure, food grade oil. Lubricates rings,
slides, pistons, seals, and other food
equipment parts that may have incidental
food contact. Provides a thin, water-resistant
film. Contains no silicones or solvents.
NSF Certified





AT-945                 12 X 16 oz. Net Wt. / Case
Call for Quote

(Click for more information)
         
DRY MOLY FILM LUBRICANT

Dry, friction-reducing lubricant and anti-seize
coating. Withstands high temperatures and
extreme pressures. Burnishes into metal to
provide long-term lubrication and protection.
Inert to water, oil, alkalis and acids. Contains
no methylene chloride.

AT-954              12 X 12 oz. Net Wt. /Case
Call for Quote






DRY MOLY LUBRICANT (LIQUID)
LT-295405         5 GAL PAIL
Call for Quote
 
RTV SILICONE

RED, HIGH TEMP         Silicone gasket maker
RTV Silicone Gasket Makers offer
unmatched performance even under the
most severe operating conditions.

AT-115                 6 X 8 Oz. Tubes / Case
Call for Quote

CLEAR        Silicone caulk & sealant
Ideal wherever a strong, permanently flexible
weatherproof caulk, sealant or adhesive is
needed. Temperature-resistant; remains
flexible and will not shrink,
crack, crumble or dry out.

AT-117                 6 X 8 Oz. Tubes / Case
Call for Quote
         
DAYLUBE - FOOD GRADE
NANOCERAMIC GREASE

Extremely high-performance lubricating
grease utilizes nano-ceramic particles that
act as sub-microscopic "bearings"
NSF H1 Food Certified



DDP-192         12 X 16oz Tubes/Case
Call for Quote

(Click here for more information)
 
WHITE FOOD GRADE GREASE


High purity white grease that meets FDA and
USDA requirements
NSF certified


DT-59850              (50 X 14 oz. tubes / case)
Call for Quote
DT-59810              (10 X 14 oz. tubes / case)
Call for Quote

(Click here for more information)
         
RED SPRAY GREASE


Special penetrating, lithium-based formula
that sprays as a liquid to flush off old
contaminated lubricant, creep deeply into
working parts, and then set up to a viscous,
thick grease. Withstands temperatures up to
500°F. Highly resistant to water, acid and
detergent wash.


AT-980              12 X 11 oz. Net Wt. / Case
Call for Quote
 
WHITE LITHIUM
SPRAY GREASE

All weather, heavy duty, multi-purpose,
penetrating grease. Sprays as a liquid,
creeps to lubrication point like an oil, then
cures to a thick, water-resistant grease.
Provides non-staining lubrication that guards
surfaces against rust and corrosion. Heat
stable to 350°F. Includes extension tubes for
easier application to remote areas.

AT-990                 12 X 11 oz. Net Wt. / Case
Call for Quote
         
LIGHT OIL LUBRICANT


Clean, clear, general purpose, light duty
lubricating oil. Economical solution to many
lubricating jobs. Excellent penetration and
creep properties. Safe for use on aluminum.
Helps prevent adhesion of mortar to
aluminum window frames. Includes
extension tubes for easier application to
remote areas.

AT-944                 12 X 12 oz. Net Wt. / Case
Call for Quote
 
DRY LUBRICANT &
RELEASE AGENT

Dry, non-oily, fast-drying lubricant and
release agent reduces friction and stops
sticking. Prolongs life of tools.  Repels oil and
water, will not attract or hold dust or dirt, and
will not become gummy. Use as a release
agent for rubber, epoxy, phenolic, polyester
and other resins. Fortified with TFE


AT-810                 12 X 12 oz. Net Wt. / Case
Call for Quote
         
CUTTING & TAPPING FLUID

Cutting & Tapping Fluid is a ready-to-use
coolant and lube oil that extends the working
life and overall performance of tools used in
milling, boring, cutting and other machining
operations.




AA-8103         12 X 13 oz. Net Wt. / Case
Call for Quote
 
RUST CONVERTER

Liquid surface conditioner and primer that
converts existing rust into an inert, protective
coating that seals out moisture and
corrosion. Unlike other products, it is not a
simple cleaner or cover-up. The special
formula attacks rust at the chemical level, for
fast, long-lasting results. Treated surfaces
turn matte black.

LA-346         12 X 1 Qt. / Case
Call for Quote
Also available in an aerosol spray!
         
Additional discounts available for scheduled delivery and multi-case purchases.  Call for quote.
Not finding what you need?
Contact Us and We'll Do the Research For You!

Phone:  208-377-5044        Toll Free:  800-955-CHEM(2436)        FAX:  208-343-2087
Email:  kevin@westernstateschemical.com

We have 1000's of products available!